Showing 1–50 of 108 results

• 

  Inim EM344R Module With 4 Supervised Inputs and 4 Relays Outputs

  Addressable module with 4 inputs (2 of them programmable as 2 conventional zones)/4 relay outputs, with built-in isolator. Direct connection to the loop. It has 3 LEDs with colour change for signalling changes in status of the inputs/outputs, alarm/fault and the isolator

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FCP0020 Flush Mount Flange (Pack of 10)

  Flush-mount flange for manual call points EC0020/IC0020 (pack of 10 pc's)

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES EWT100 DONGLE

  The EWT100-DONGLE is an interface device that can be used to connect a personal computer or a tablet, running the appropriate software application, to a wireless system based on the FireVibes protocol.

  Standards: IEEE 802.15.1

       

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES EWT100 Wire To Wireless Protocol Translator

  Built-in loop short-circuit isolator

  Wireless communication range up to 1km for translators and expansion modules,

  up to 200m between translator/expansion modules and wireless devices

  Certified EN54-17, EN54-18 and EN54-25

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES EWT100-Tester Wireless Survey kit

  The kit allows you to perform positioning tests and evaluate the radio signal before installing the system. The value of the radio signal transmitted by the test detector and the Test transmitter can be viewed on the app for Android systems, which can be downloaded from the store.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES IWT100 Wireless Conventional Expansion

  The IWT100 has to be connected to a conventional control panel’s zone line and a sounder line; the conventional control panel will then have the capability to detect fire alarms in the area protected by the wireless system and the capability of activating or silencing the wireless sounders of the FireVibes system. IWT100 needs an EN 54-4-certified external power supply source.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WC0010 Manual Call Point

  Two-way wireless communication

  Can be used with the EWT100 address translator or the XWT100 expansion module

  Wireless communication based on two redundant channels

  Wireless communication range extendable up to 200m

  Certificate EN54-25 and EN54-11

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WD100 Wireless Smoke Detector

  Smoke Detection based on double detection (double reflection angle)

  Compensation for contamination of the sample chamber

  Two-way radio communication

  Uses standard lithium batteries

  Battery life 10 years

  Certified EN54-25 and EN54-7

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WD200 Wireless Temperature Detector

  It can be set as rate of rise (A1R) or fixed high temperature (BS)

  Two-way radio communication

  Radio communication based on two redundant channels

  Battery life 10 years

  Uses standard lithium batteries

  Certified EN54-25 and EN54-5

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WD300 Wireless Smoke and Temperature Detector

  Smoke Detection based on double detection (double reflection angle)

  It can be set as rate of rise (A1R) or fixed high temperature (BS)

  Uses standard lithium batteries

  Battery life 10 years

  Certified EN54-25 and EN54-5

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WIL0010 – Wireless Alarm Indicator

  Two-way wireless communication

  Can be used with the EWT100 addressed translator or the XWT100 expansion module

  Wireless communication based on two redundant channels

  Wireless communication range extendable up to 200m

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WM110 – Wireless input module

  Two-way wireless communication

  One supervised input

  Wireless communication based on two redundant channels

  Wireless communication range extendable up to 200m

  Battery life 10 years

  Certified EN54-25 and EN54-18

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WM202SR – Wireless output module

  Two-way wireless communication One relay output Two supervised outputs capable of supplying 12 or 24Vdc Wireless communication based on two redundant channels Wireless communication range extendable up to 200m Certified EN54-25 and EN54-18

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WS2010RE Addressable Audible Alarm Sounder (Red)

  Can be activated with two different tones (prealarm and alarm)

  Level adjustable by DIP SWITCH

  Extended radio communication range (up to 200m)

  Uses standard lithium batteries

  Certified EN54-25, EN54-23 and EN54-3

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WS2010WE Wireless Addressable Wall Sounder (White)

  Can be activated with two different tones (prealarm and alarm)

  Level adjustable by DIP SWITCH

  Extended radio communication range (up to 200m)

  Uses standard lithium batteries

  Certified EN54-25, EN54-23 and EN54-3

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WS2020RE Wall Sounder Beacon (Red)

  Can be activated with two different tones (prealarm and alarm)

  Level adjustable by DIP SWITCH

  Extended radio communication range (up to 200m)

  Uses standard lithium batteries

  Certified EN54-25, EN54-23 and EN54-3

   

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WS2020WE Wall Sounder Beacon (White)

  Can be activated with two different tones (prealarm and alarm)

  Level adjustable by DIP SWITCH

  Extended radio communication range (up to 200m)

  Uses standard lithium batteries

  Certified EN54-25, EN54-23 and EN54-3

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WSB1010 Sounder Base

  Can be activated with two different tones (pre-alarm and alarm) Two-way wireless communication Wireless communication range extendable up to 200m Uses standard lithium batteries The alarm sound and volume can be selected with the DIP switches Certified EN54-25, EN54-23 and EN54-3

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WSB1020 Sounder Beacon Base – (White Led)

  32 different tones settable via DIP switch

  Level adjustable via DIP switch (4 levels)

  Adjustable flash power

  Two-way wireless communication

  Wireless communication range extendable up to 200m

  Uses standard lithium batteries

  Certified EN54-25, EN54-23 AND EN54-3

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES WSB1021 Sounder Beacon Base – (Red Led)

  32 different tones settable via DIP switch

  Level adjustable via DIP switch (4 levels)

  Adjustable flash power

  Two-way wireless communication

  Wireless communication range extendable up to 200m

  Uses standard lithium batteries

  Certified EN54-25, EN54-23 AND EN54-3

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FIREVIBES XWT100 Wireless Expansion

  Wireless communication range up to 1Km translators and expansion modules, up to 200m between translators/expansion modules and wireless devices Wireless devices completely managed individually via control panel Certified EN54-18 and EN54-25

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim IUK12MONITORING

  Central Station Monitoring Fee 12 Monthly - Applies after 1st 12 months

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim IUKFULLBAND-GX5606-4G/5G

  Fullband GXS606 4G/5G Antenna – Outdoor wall mount Omni Directional High Gain Antenna 5dBi Peak Gain – works with all GSM, 2G, 3G, UMTS, LTE, 4G and 5G Devices.

  Please contact an Approved Inim Provider to Purchase
  Add to Order
• 

  Inim IUKGRADESHIFTPRO2

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  INIM Previdia UltraVox

  Previdia Ultravox is a addressable control panel for fire detection and voice evacuation. The control panel is equipped with 2 loop modules (expandable to 16)

  CPR EN54pt2/ pt4/ pt16/ pt2, EN12094pt1 certified.

   

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-C-COM

  Once installed inside the cabinets of Previdia Compact control panels, the optional PREVIDIA-C-COM module provides two RS232 ports and two RS485 ports for the connection of remote devices, using the following protocols. 2 RS485 channels, 2 RS232 channels Power supply voltage: 19÷30Vcc Consumption @ 27.6V: 15mA Operating temperature: -5°C ÷ +40°C

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-C200SZR Control Panel

  Analogue addressable Two Loop Fire control panel, max 240 addresses. 4.3” colour LCD graphic touchscreen

  2,1A Switching power supply Max 2x 7Ah Batteries Zone Status LED's

  Small cabinet 322 x 324 x 86 mm

  The Cabinet Colour is Red

  CPR Certification EN54pt2-4, EN54pt21 over TCP-IP channel IMQ.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim Previdia-M-EXP Micro Expansion Module

  The Previdia M-EXP expansion module adds to the control panel 8 L-type terminals configurable as the same number of detection zones (Fire or Gas); 6 T-type terminals configurable as low-power output, function input or fire detection zone for alarm call points only; an I/O terminal configurable as high-power output, function input or fire detection zone for alarm call points only.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-MLZR Conventional Control Panel

  Conventional 10 zone (4+6 with 1xNAC, 4+4 with 3xNAC) smoke detection panel, expandable to 70 zones (36+34), with 30 zone LED indicators, 4.0A Switching power supply for 17Ah batteries CPR Certification EN54pt2-4-21.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-MSZR Conventional Control Panel

  Conventional 10 zone (4+6 with 1xNAC, 4+4 with 3xNAC) smoke detection panel, expandable to 40 zones (20+20), with 30 zone LED indicators, 1.5A Switching power supply Max. 2 x 12V@7Ah batteries CPR Certification EN54pt2-4-21.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim Smartline 020-4 Conventional Panel

  The SmartLine conventional fire-detection control panel is a a 4 zone model expandable to 20 zones CPD Certification EN54pt2-4 and EN12094 IMQ. The extreme compactness, trouble-free installation, uncomplicated programming procedures and simple end-user operation make this highly competitive control panel ideal for all small and medium applications, especially those applications where fast installation and programming are among the most important aspects of the system. The numerous functions (timers, equational logic, etc.), extensive flexibility (automatic output balancing, multifunction inputs, customizable outputs, gas function integration, etc.), and innovative connectivity capabilities (RS485 BUS for power supply stations, Internet connection, etc.), provide the tranquillity of knowing for sure that this powerful tool is capable of satisfying every need of every type of installation.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim SPS24060SR Smart Level PSU (Red)

  Inim SPS24060SR Smart Level Power Supply Station 27Vcc 1.5A + 0,6A to battery-charge (60W). Power supply station. Signaling LEDs. LOOP connection or Stand-alone mode. 1 output. Metal casing for two 12Vcc@7Ah batteries 3 short-circuit protected outputs. CPR Certification EN54pt4 IMQ  and EN12101pt10

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA216R MAX Control Panel

  Previdia Max is a modular system for the realization of fire detection and extinguishment systems. Analogue addressable control panel with networking capability. 7" Touch screen. CPR Certification EN54pt2/pt4/pt21 and EN12094pt1 LPCB Approved.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-C200LZR Control Panel

  Inim Compact analogue-addressable control panel, Red, designed to support as a standalone or integrated system, Fire Alarm, Gas Detection and Fire Sprinkler Systems, Capable of managing 2 loops of 240 points. Supports graphical maps and ONVIF cameras as standard. Terminals as standard for the HORNET+ network connection with other control panels. On-board Ethernet connection for remote management, or connection to BMS monitoring software, MODBUS, BACNET protocol over TCP-IP available.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-C050SZR Control Panel

  Inim Compact analogue-addressable control panel, Red, designed to support as a standalone or integrated system, Fire Alarm, Gas Detection and Fire Sprinkler Systems, Capable of managing 1 loop of 64 points. Supports graphical maps and ONVIF cameras as standard. Terminals as standard for the HORNET+ network connection with other control panels. On-board Ethernet connection for remote management, or connection to BMS monitoring software, MODBUS, BACNET protocol over TCP-IP available.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-C200LZER Control Panel

  Inim Compact analogue-addressable control panel, Red, designed to support as a standalone or integrated system, Gas Extinguishing, Fire Alarm, Gas Detection and Fire Sprinkler Systems, Capable of managing 2 loops of 240 points. Supports graphical maps and ONVIF cameras as standard. Terminals as standard for the HORNET+ network connection with other control panels. On-board Ethernet connection for remote management, or connection to BMS monitoring software, MODBUS, BACNET protocol over TCP-IP available.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-C050SZER Control Panel

  Inim Compact analogue-addressable control panel, Red, designed to support as a standalone or integrated system, Gas Extinguishing, Fire Alarm, Gas Detection and Fire Sprinkler Systems, Capable of managing 1 loops of 64 points. Supports graphical maps and ONVIF cameras as standard. Terminals as standard for the HORNET+ network connection with other control panels. On-board Ethernet connection for remote management, or connection to BMS monitoring software, MODBUS, BACNET protocol over TCP-IP available.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-C200SZER Control Panel

  Analogue Control Panel 2 Loops of 240 Points Small Cabinet with 1.5A PSU 7Ah Batteries Zone Status LED's Extinguishing Management The Cabinet Colour is Red

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-C-REPR Module

  Remote keypad for Previdia Compact and Max control panels. The analogue control panels from the Previdia Compact range are the perfect solution for small to medium installations

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-C-REPER Module

  Remote keypad for Previdia Compact and Max control panels. Gas Extinguishant Display. Connects to a HORNET+ network (double RS485 connection). It provides detailed information about the entire network. Customizable display. Comes in red thermoplastic enclosure.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim PREVIDIA-C-COM-LAN Module

  The analogue control panels from the Previdia Compact range

  Socket for the Ethernet Network Connection

  Internal Ethernet module.

  Sends e-mails and attachments.

  Built-in Web-server, BACNET IP protocol (optional).

  IP ONVIF camera interface for video verification.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim IFM2L Loop Management Module

  Module for the management of two loops. Each loop is capable of managing 240 devices. Each control panel manages up to 8 IFM2L modules. Only for expandable analogue PREVIDIA MAX control panels

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim IFM24160 Switching Power-Supply Module

  Internal CAN DRIVE power-supply module. 2 programmable Nac, 1 programmable relay. 5.2A maximum available current. Only for expandable analogue PREVIDIA MAX control panels.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim IFM4IO Module

  IFM4io 4 power input/output module Each control panel can manage a maximum of 16 IFM4io modules. Only for expandable analogue PREVIDIA MAX control panels

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim IFMLAN TCP IP Module

  Advanced TCP-IP service management module. Allows a second control panel connection to the Ethernet network Each control panel can manage one IFMLAN module only. Only for expandable analogue PREVIDIA MAX control panels

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim IFMNET Connection Module

  Module for the connection of two or more Control panel in the Hornet + network, up to a maximum of 48. This module provides two RS485 ports for connection to other control panels; the wiring is completed as closed ring.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim IFMEXT Module

  Gas extinguishment-system management module. Provides terminals for the management of devices together with the adequate activation logic. Only for expandable analogue PREVIDIA MAX control panels

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FPMCPU-G Front-plate CPU Module

  This Unit comes in Dark Grey. Main control front plate unit for Previdia Max control panels. 7" Touch screen. The FPMCPU module has three operating modes (main unit, backup unit and repeater). Only for expandable analogue PREVIDIA216 control panels

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FPMLED-G Panel Module

  Front Plate Module equipped with 50 configurable tri-colour LEDs (green, yellow and red) Only for expandable analogue PREVIDIA216 control panels. This unit comes in Dark Grey.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote
• 

  Inim FPMLEDPRN-G Panel Module

  Module equipped with 50 configurable tri-colour LEDs (green, yellow and red), and an 80mm termic printer, it provides real-time printouts of the events. This unit comes in Dark Grey.

  Please contact an Approved Inim Provider to Purchase
  Add to OrderAdd To Quote